How to Stain Your Cedar Fence
Cedar fence staining is a way to bring the beauty of the wood to the exterior of your home and to give it a more natural look. While this is not a substitute for painting, it can give your exterior property a much needed fresh coat of color. In addition, this will give your home the appearance of being in better condition than it really is.
It is important to note that it is possible to stain cedar fence yourself, but you may want to hire a professional. A skilled craftsman will be able to help you properly stain cedar and will be able to paint or varnish the fence in a way that you like. You should also make sure the cedar fence stain does not cause any damage to the natural wood, especially if you plan on leaving it untreated for long periods of time. If you do damage the cedar, you will have to replace it.
Before you begin your cedar fence staining project, you should first make sure the entire fence is clean. Make sure to wipe any dirt away from the fence boards, including any rust, leaves, branches, and other debris. After the fence is completely clean, you will need to pre-paint the fence in the color of your choice. While it is not recommended to paint over the existing paint, you can purchase an enamel paint sprayer and apply the paint to the fence before the stain is applied.
When you are ready to stain your cedar fence, you will need to prepare the wood. First, you should use a soft brush to remove any tree sap or moisture that has accumulated on the fence. Next, you should place a cloth or paper towel over the stain so that the stain does not soak into the wood. Once you have soaked up the stain, you should blot it off with a paper towel, so that it does not adhere to the wood.
When you are ready to apply the stain, you will need to allow the cedar fence to sit out for a day. In the evening, take the stained wood and roll it in cornmeal. This will allow the color to absorb properly and allow the cedar stain to fully penetrate the wood.
After the cedar fence is soaked, you should allow it to sit in a solution of vinegar and water. This mixture will help the wood to dry.
The next step in cedar fence staining involves sealing the fence. The best way to seal the fence is by using the same wood stain that you used for the top coat of the fence. However, if you are not confident about applying the stain, you can purchase polyurethane stain for your stain. and apply it right over the top of the top coat of the wood stain.
Preparing the Foundation for Your Fence Stain Project
Before you install the stain, you should sand and wood chips away. After the staining is done, you will then attach the new coating to the cedar fence.
You should first coat the fence with a coat of polyurethane stain. This will prevent the stain from being ruined if it is accidentally spilled on the ground.
After the cedar fence is stained, you will need to allow it to dry. For this, you should place a sheet of plywood under the fence. You can also place your feet under the cedar fence to ensure that it remains dry.
After the cedar fence is completely dry, you will need to apply a coat of polyurethane stain. to protect it.
To finish your new cedar fence, you will want to spray a coat of polyurethane stain to all exposed surfaces of the fence. and allow it to dry overnight. In addition to this, you will want to apply polyurethane sealant to protect the cedar fence and finish it off with a coat of stain.