If you are looking for a way to bring a new look to your wooden fence, it may be time to learn some tips on how to stain wood fences first. Here are a few tips that can help you accomplish this task easily.
Basic Steps to Learn How to Stain Wood Fence
The first step is to decide which type of stain you are going to use. The two common types of stains are oil-based and water-based. Each type of stain has a different application method and a different time frame in which it should be applied. Some stains will require more than one coat, whereas others are only needed once a year.
Before you start to apply the stain, make sure that you thoroughly dry all areas around the fence. Once you have done this, it is time to choose a stain color. You can always go with the color that most closely represents your home or business.
You should avoid applying the color to an area where you plan to have children playing. Remember, this color will remain for quite some time and is not easy to remove. Also, keep in mind that different staining products may require different colors for proper application.
Next, select a brush or sponge that is appropriate for your type of stain. You can either purchase a cheap brush or make one yourself using a piece of plastic piping and some old newspaper. Make sure to pick a brush that has soft bristles as these are best for absorbing stains and other unwanted particles from the surface. As a general rule, try to avoid using stiff bristle brushes because they will tend to pull the stain off the fence rather than letting it penetrate deeply into the wood.
The next step is to brush the stain onto the fence. If you are using a brush, the first thing to remember is to make sure that you do not use too much pressure on the brush. Too much pressure will cause streaks and other issues on the fence. Instead, apply a light brushing that goes around the perimeter of the fence. To add more interest to the stain, you can even add a coat of sealant after you finish the first layer.
If you are using a sponge, it is important to blot the stain immediately after you remove it from the brush. The longer you let the stain sit on the fence, the harder it will become to remove and reapply the next coat. For this reason, it is best to apply several coats before putting it away. The last step is to buff the wood after the stain has dried to ensure that the wood has been properly protected.
A stain will give your wood fence a new appearance without having to spend a lot of money or time on repair. To learn more about stain, it is best to talk with a professional who can show you the right product for your fence. It will also allow you to make an informed decision. on how to apply a stain and which color or brand you would like to use.
Benefits of Staining Wood
The benefits of a stain are that it will increase the value of your home and save you time and money in the long run. By choosing the right type of stain, you will be able to give your fence a new, well-polished look without having to put a lot of extra work or money into the project.
Another benefit of using a stain is that it can help to protect your wood from damage. The reason is that if you use something like vinegar on the surface of your fence, you will increase the amount of moisture in the wood. This means that your wood is more likely to rot or even rot faster. With stain, this moisture barrier will be significantly reduced. Check out our article about how long does a wood fence last.
Final Thoughts
The downside of using stain is that it can be messy. Depending on what color or brand you choose, applying stain can take a little bit of time. If you have children or pets, they may accidentally spill their drinks or food onto the stain and the stains may even get on the wooden surface of the fence.
Interested in a custom designed fence installed? Check out your local Fence Company Fresno
Get FREE Quotes for a Custom Fence Design That Matches Your Style